Komercijalni zrak kompresor sušilica regenerativna sušilica

Commercial Air Compressor Dryer Regenerative Desiccant Dryer
Commercial Air Compressor Dryer Regenerative Desiccant Dryer
Commercial Air Compressor Dryer Regenerative Desiccant Dryer
Commercial Air Compressor Dryer Regenerative Desiccant Dryer
Commercial Air Compressor Dryer Regenerative Desiccant Dryer
Commercial Air Compressor Dryer Regenerative Desiccant Dryer

Komercijalni zrak kompresor sušilica regenerativna sušilica

Hrana i piće proizvodnja je druga industrija to ja oslanjanje on grijano komprimirano zrak sušilice. Vlaga in the komprimirani zrak can olovo to ugroženo proizvod kvaliteta i kontaminacija. Ove sušilice remove the vlaga, osiguranje da proizvodi are safe za potrošači i meet the required quality standards.

Pošaljite upit

Uvod u proizvod

Proizvodi Video

Proizvodi Opis

Proizvod Karakteristike

● R22 rashladno sredstvo i cijev toplina izmjenjivač are korišteno za više than 80 kubični metri; the gas-tekućina separator adopts a patentirano trostupanjsko separacija metoda od "direct collision separacija, mala brzina centrifugal separacija i nehrđajući čelik žica žica mreža demisting separacija", which will remove 99. 9 posto of the the liquid The moisture is separated from the hlađeno komprimirano air to prevent the sekundarno isparavanje of vlaga i ensure te niska rosa točka kvaliteta of the finished gas;

Rad princip

The amount of water vapor in the comprimirani air is determined by the temperatura of the comprimirani air: under the condition that the pressure of the comprimirani air is basically nepromijenjen, reducing the temperatura the the comprimirani air can reduce the content of water va in the comprimirani air, and the excess water vap will condense into liquid.

Proizvodi specifikacija

Primjenjivo Radni Uvjeti

Max ulaz temp	60 stupanj	Pritisak rosa točka	2 stupanj ~10 stupnjeva
Okoliš temperatura raspon	5 stupanj -50 stupanj	Hlađenje način rada	Zračno hlađeno
Tlak raspon	{{0}}.6-1.6Mpa ( 0.5-12Nm³/min )		0.5~2 Nm/min is R134a, 3~12Nm3/min is R410a,
Tlak raspon	{{0}}.6-1.0 Mpa (15Nm³/min and above )		15~80Nm/min is R407C, 80 Nm/min and above is R22

Dizajn Radni Uvjeti

Ulaz zrak temperatura	38 stupnjeva	Rad pritisak	0.7Mpa
Temperatura okoline	38 stupnjeva	Hlađenje voda temperatura	Manje od ili jednako to 32 stupanj

Zrak sušilica for kompresor hlađenje (ploča pera tip)

Stavka Model	（Nm³/min）	（V）	Navijač Moć （W）	veza cijev promjer	N.W （Kg）	L （Mm）	W （Mm）	H （Mm）	Zrak glasnoća （Nm³/h）
SDLF-0.5	0.65	220	40	G1"	34	400	560	730	410
SDLF-1	1.2	220	40	G1"	36	400	560	730	410
SDLF-2	2.5	220	50	G1"	45	520	640	890	820
SDLF-3	3.6	220	85	G1"	54	520	640	890	1000
SDLF-4.5	5.0	220	165	G1-1/2"	60	540	700	1000	1850
SDLF-6	6.8	220	165	G1-1/2"	65	540	700	1000	1850
SDLF-8	8.5	220	170	G2"	76	610	900	1070	3700
SDLF-10	10.9	380/220	150	G2"	88	610	900	1070	3700
SDLF-12	12.8	380/220	150	G2"	88	610	900	1070	3700
SDLF-15	16	380/220	380	DN65	255	1170	920	1420	7600
SDLF-20	22	380/220	380	DN65	260	1170	920	1420	7600
SDLF-25	26.8	380/220	460	DN80	290	1170	920	1420	9000
SDLF-30	32	380/220	840	DN80	350	1400	1200	1600	12500
SDLF-40	43.5	380/220	1100	DN100	485	1400	1200	1600	15000
SDLF-50	53	380/220	920	DN100	800	1600	1200	1600	18000
SDLF-60	67	380/220	920	DN125	1000	1600	1400	1650	18000
SDLF-80	90	380/220	2200	DN125	1280	1800	1500	1770	30000

Proizvodi Detalji

Naslov

Naša usluga

01. Pretprodaja: The main responsibilities of the sales and Research Institute are to review the technical and business solutions, provide business and technical support to customers, and can accurately and timely solve all business and technical requirements before sales.

02. On sale: The main responsibilities of the Ministry of Commerce are order management and customer management. The core of order management is order delivery, business review of the scheme, and order. Timely solve the problems in the execution of the contract, and communicate with customers in order processing and delivery.

03. Nakon prodaje: Strong and perfect after-sales service network, there are 9 customer service centers in major regions of China, each center has professional service engineers, a total of more than 50 people, quickly and timely solve problems in after-sales service, such equipment start-up debugging, and troubleshooting.

If you need, please feel free to contact us for more information. Email: shanli@hzsljh.com